China Tile Supplier Ceramic Tile Manufacturer and exporter

Soluble Salt

sales@chinatilesupplier.com (lucky) — Wed, 30 Nov -001 00:00:00 -0700

Use: indoor,infloor Size: 600x600MM,800x800MM Finish: polish The body is relatively white employing single-baking technology, the tiles have been treated by marbleization, showing a natural and beautiful appearance; low water absorption:≤0.3%; high hending strength:≥45Mpa; the sizes are up to standards, with good evenness. After antifouling treatment, corrossion from various pollution sources during paving will be decreased greatly. They are suitable for indoor and outdoor decoration. 1.2 Marble like series: the rich and variety of the base color likes the sky roseate clouds , nature and harmonious , hard material quality and fluency veins

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Fri, 30 Nov 2007 06:14:08 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Mon, 03 Dec 2007 02:54:43 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Tue, 04 Dec 2007 18:55:51 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Tue, 04 Dec 2007 19:02:53 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Tue, 04 Dec 2007 19:07:07 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Tue, 04 Dec 2007 19:10:33 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Tue, 04 Dec 2007 19:19:52 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Tue, 04 Dec 2007 19:22:33 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Tue, 04 Dec 2007 19:26:57 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Tue, 04 Dec 2007 19:29:52 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Tue, 04 Dec 2007 19:32:57 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Tue, 04 Dec 2007 20:03:15 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Tue, 04 Dec 2007 20:06:23 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Tue, 04 Dec 2007 20:09:03 -0700

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Thu, 12 Apr 2007 20:11:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Thu, 12 Apr 2007 21:27:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Thu, 12 Apr 2007 21:30:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Thu, 12 Apr 2007 21:48:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Thu, 12 Apr 2007 21:53:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Thu, 12 Apr 2007 22:33:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Thu, 12 Apr 2007 22:47:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Thu, 12 Apr 2007 23:02:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Thu, 12 Apr 2007 23:07:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 19:54:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 19:56:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 19:59:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:00:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:02:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:09:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:11:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:12:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:14:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:16:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:17:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:20:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:22:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:25:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:27:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:28:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:30:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:33:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Soluble Salt

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:35:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Crystal Double Loading

sales@chinatilesupplier.com (lucky) — Thu, 12 Jul 2007 19:21:00 -0600

Double Loading series tiles vitrified polished:a super and tiny powder for amountinf to 220 throungh two cloth anticipates to supperss,nature veins,thr polish degree is up to more than 80.15% Higher than the other polished bricks,haveing the modem type.

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Crystal Double Loading

sales@chinatilesupplier.com (lucky) — Thu, 12 Jul 2007 19:21:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Crystal Double Loading

sales@chinatilesupplier.com (lucky) — Thu, 12 Jul 2007 19:23:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Crystal Double Loading

sales@chinatilesupplier.com (lucky) — Thu, 12 Jul 2007 19:27:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Golden Beige

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:43:00 -0600

Golden series tiles vitrified polished:unique imported cream marfil effect,the product features dense nature, simple and elegant with strong artic taste
Pemeated with golden and other bright color on base,with a better restult than natural beige stone,more profound design,giving people a natural,gentle,graceful and changeable artistic effect.

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Golden Beige

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:44:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Golden Beige

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:45:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Golden Beige

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:46:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Golden Beige

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:48:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Golden Beige

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:50:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Golden Beige

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:52:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Golden Beige

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:54:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Golden Beige

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:56:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Golden Beige

sales@chinatilesupplier.com (lucky) — Sat, 12 May 2007 20:57:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Sand Stone

sales@chinatilesupplier.com (lucky) — Tue, 12 Jun 2007 19:13:00 -0600

The most advanced granule-making technique is applied to the Sand stone.The edges of the translucent granules are smooth,and this makes sure that the granules and tbe body naturally inosculated.Furthermore,the ingredientd of the tile are special.Repetitions color-penetrating are of different depth.As a result,the texture is natural,elegant and harmonious.

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Sand Stone

sales@chinatilesupplier.com (lucky) — Tue, 12 Jun 2007 19:13:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Sand Stone

sales@chinatilesupplier.com (lucky) — Tue, 12 Jun 2007 19:15:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform

Sand Stone

sales@chinatilesupplier.com (lucky) — Tue, 12 Jun 2007 19:31:00 -0600

Packing information:

SIZE		CARTON			PALLET			20`CONTAINER
SIZE		CARTON			PALLET			22TONS			24TONS			27TONS
L	W	PCS	M²	G.W.	CTNS	M²	G.W.	CTNS	PALTS	M²	CTNS	PALTS	M²	CTNS	PALTS	M²
500	500	7	1.75	33	28/56	49/98	924/1848	680	15	1190.00	728	16	1274.00	840	20	1470
600	600	4	1.44	30	40/80	57.60/115.2	1200/2400	720	18	1036.8	800	20	1152	900	20	1296
800	800	3	1.92	50	24/30	46.08/57.6	1200/1500	456	19	875.52	480	20	921.6	540	20	1036.8
400	400	11	1.76	30	48	84.48	1440	720	15	1267.2	800	20	1408	900	20	1584
300	600	8	1.44	30	40/60	57.60/86.4	1200/1800	720	18	1036.8	800	20	1152	900	20	1296

Standard:

TESTING ITEM	METHOD	EN STANDARD	OUT STANDARD
Water Absorbing Rate	EN99	<= 0.5%	<= 0.5%
Bending Strength	EN100	>27N/mm2	>27N/mm2
Length Variation	EN98	±0.6% max	±0.6% max
Width Variation	EN98	±0.6% max	±0.6% max
Thickness Variation	EN98	±5% max	±5% max
Surface Evenness	EN98	±0.5% max	±0.5% max
Edge Straightness	EN98	±0.5% max	±0.5% max
Right Angle	EN98	±0.6% max	±0.6% max
Attrition Rate	EN102	<205mm3	<205mm3
MOH'S Hardness Scale	EN101	>6MOH'S	>6MOH'S
Linear Coefficient of Thermal Expansion	EN103	<9x10e-6 k-1	<9x10e-6 k-1
Chemical Corrosion Resistance	EN106	No sample must show visible signs of chemical attack	conform
Thermal Shock	EN104	No sample must show visible alterations	conform
Freeze Resistance	EN202	No sample must show break or visible alterations of the surface	conform